D-link DES-3225G Bedienungsanleitung PDF herunterladen (Seite 23)

24-port NWay Ethernet Switch User’s Guide

Connecting The Switch 13

♦ A 100BASE-TX hub or switch can be connected to the Switch via a two-pair Category 5 UTP/STP straight cable.

If the other switch or hub contains an unused Uplink port, we suggest connecting the other device’s Uplink (MDI-II) port to

any of the switch’s (MDI-X) ports (1x - 22x, or one of the 100BASE-TX module ports) using a normal straight-through cable,

as shown below.

If the other device does not have an unused Uplink port, make the connection with a normal straight-through cable from

one of the Uplink ports on the switch to any normal crossed port on the hub. Alternatively, if you have a crossover cable you

can save the Uplink ports for other connections and make this one from a crossed port to another crossed port.

Figure 4-2. Switch connected to a normal (non-Uplink) port on a hub or switch using a straight or crossover

cable

10BASE-T Device

For a 10BASE-T device, the Switch’s LED indicators should display the following:

♦ 100M LED speed indicator is OFF.

♦ Link/Act indicator is ON.

100BASE-TX Device

For a 100BASE-TX device, the Switch’s LED indicators should display the following:

♦ 100M LED speed indicator is ON.

♦ Link/Act is ON.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 174 175

Keine Kommentare

D-link DES-3225G Bedienungsanleitung Seite 23