D-Link DSL-2750B Bedienungsanleitung PDF herunterladen (Seite 38)

Section 3 - Configuration

D-Link DSL-2750B User Manual

LAN SETUP

You can configure the LAN IP address to suit your preference. Many users will find it convenient to use the default settings together with DHCP

service to manage the IP settings for their private network. The IP address of the Router is the base address used for DHCP. In order to use the

Router for DHCP on your LAN, the IP address pool used for DHCP must be compatible with the IP address of the Router. The IP addresses

available in the DHCP IP address pool will change automatically if you change the IP address of the Router.

To access the Local Network setting window, click on the Local Network button in the SETUP tab.

ROUTER SETTINGS

To change the Router IP Address or Subnet Mask, type in the desired

values.

DHCP SERVER SETTINGS (OPTIONAL)

The Enable DHCP Server is selected by default for the Router’s Ethernet

LAN interface.

Set the DHCP IP Address Range and the default is from 192.168.1.2 to

192.168.1.254. The IP address pool can be up to 253 IP addresses.

Set the value hours on the DHCP Lease Time

If you don’t want DSL-2750B to be the DHCP server, you can enable

DHCP relay to pass the DHCP discover packets of the clients to another

DHCP server.

Please set the DHCP server IP address on the DHCP Server IP Address

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 111 112

Keine Kommentare

D-Link DSL-2750B Bedienungsanleitung Seite 38