D-Link DES-1008PA Betriebsanweisung PDF herunterladen (Seite 14)

PoE MAX

Green

When the power output to PDs is over 42W. No additional PDs can be

powered.

Off When the system is using less than 42W

Blinking

Green

After the power output to PDs has reached or exceeded the maximum

power budget, if the user unplugged certain PDs and made the system

power left over 10W, the PoE MAX will blink 2 minutes.

Ethernet port status LEDs (Ports 1~8)

10/100M Link/ACT:

10M :

When the 10M LED lights on, the respective port is successfully

connected to 10M Ethernet network. Otherwise, when the 10M LED is

blinking, the port is transmitting or receiving data on the Ethernet

network.

100M :

When the 100M LED lights on, the respective port is successfully

connected to 100M Fast Ethernet network. Otherwise, when the 100M

LED is blinking, the port is transmitting or receiving data on the Fast

Ethernet network.

Off : No link.

PoE Rule

POE M ax: this function will help to protect the POE Switch and to

stabilize the power transmitting to the powered device (PD).

If the system power usage is >= 42, the POE MAX LED will turn on

and the system will not provide power to the additional POE PD. This

is done to protect the POE Switch itself and to stabilize the power

transmitting to the other POE PDs plugged into the Switch.

1 2 ... 9 10 11 12 13 14 15 16 17

Keine Kommentare

D-Link DES-1008PA Betriebsanweisung Seite 14