D-Link DWA-510 Bedienungsanleitung PDF herunterladen (Seite 53)

53D-Link DWA-510 User Manual

Section 5 - Troubleshooting

•CheckthattheLEDindicatorsforthebroadbandmodemareindicatingnormalactivity.Ifnot,theremaybeaproblem

with the broadband connection.

•CheckthattheLEDindicatorsonthewirelessrouterarefunctioningproperly.Ifnot,checkthattheACpowerand

Ethernet cables are ﬁrmly connected.

•CheckthattheIPaddress,subnetmask,gateway,andDNSsettingsarecorrectlyenteredforthenetwork.

•InInfrastructure mode,makesurethesameService Set Identiﬁer (SSID) is speciﬁed on the settings for the wireless

clients and access points. The SSID factory default setting for most D-Link products is default.(Double-clickonthe

WLAN icon in the taskbar. The Link Info screen will display the SSID setting.)

•In Ad-Hocmode,bothwirelessclientswillneedtohavethesameSSID. Please note that it might be necessary to

set up one client to establish a BSS (Basic Service Set)andwaitbrieybeforesettingupotherclients.Thisprevents

several clients from trying to establish a BSSatthesametime,whichcanresultinmultiplesingularBSSs being

established,ratherthanasingleBSS with multiple clients associated to it.

•CheckthattheNetwork Connection for the wireless client is conﬁgured properly. Select AP (Infrastructure) when

connecting to an access point and select Ad-Hoc mode when connecting without an access point. Double-click on

the WLAN icon in the taskbar > click on Conﬁguration to change the settings for the wireless adapter.

4. What should I do when the computer with the DWA-510 installed is unable to connect to the wireless network and/or the

internet?

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 62 63

Keine Kommentare

D-Link DWA-510 Bedienungsanleitung Seite 53