D-Link DI-808HV Bedienungsanleitung

How to setup PPTP VPN connection with DI-804HV or DI-808HV using Windows PPTP client Make sure your DI-804HV or DI-808HV is running firmware ver.1.

Appendix 1. How to test your VPN conection. After verifying username and password your computer should establish a PPTP connection with the router.

Appendix 2 Connecting to remote computers/drives via VPN You can map remote computers’ drives by opening Windows Explorer and going to Tools > Map

Appendix 3 Note to DSL-300, DSL-300+, DSL-302G modems users and DSL-500, DSL-504, DSL-604+ users. If you are using DSL-300 to connect your DI-804HV/

With DSL-302G the setup is similar. This modem uses 10.1.1.1 address on LAN. In order to enable VPN traffic passthrough in this modem you need t

Click on PPTP Server Settings button.

Next to PPTP Server click on Enable option. Enter Virtual IP of PPTP Server. This virtual IP should be different from your LAN subnet. Under Authent

The router setup for PPTP connection is now complete. To setup your remote client for PPTP connection you can use Windows built-in PPTP client. We

Click on Create New Connection: Select “Connect to the network” option: Select “Virtual Private Network connection”:

Give the connection a name:

Select “Do not dial the initial connection option”: Enter the IP address that DI-804HV is getting from the ISP (it should be public IP address). If

Continue with the Connection Wizard:

To establish a VPN connection: make sure you have access to the Internet. Make sure the modem or the router you are using to connect to the Internet s