D-Link DIR-615 Bedienungsanleitung PDF herunterladen (Seite 38)

35D-Link DIR-615 User Manual

Section 3 - Conguration

Set the transmit power of the antennas.

Beacons are packets sent by an Access Point to synchronize

a wireless network. Specify a value. 100 is the default

setting and is recommended.

This value should remain at its default setting of 2346. If

inconsistent data ow is a problem, only a minor modication

should be made.

The fragmentation threshold, which is specied in bytes,

determines whether packets will be fragmented. Packets

exceeding the 2346 byte setting will be fragmented before

transmission. 2346 is the default setting.

(Delivery Trafc Indication Message) 1 is the default setting.

A DTIM is a countdown informing clients of the next window

for listening to broadcast and multicast messages.

Select Short or Long Preamble. The Preamble denes the

length of the CRC block (Cyclic Redundancy Check is a

common technique for detecting data transmission errors)

for communication between the wireless router and the

roaming wireless network adapters. Note: High network

trafc areas should use the shorter preamble type.

CTS (Clear To Send) is a function used to minimize collisions among wireless devices on a wireless local area network (LAN).

CTS will make sure the wireless network is clear before a wireless client attempts to send wireless data. Enabling CTS will

add overhead and may lower wireless through put. Always: CTS will always be used to make sure the wireless LAN is clear

before sending data. Auto: CTS will monitor the wireless network and automatically decide whether to implement CTS based

on the amount of trafc and collisions that occurs on the wireless network.

Transmit

Power:

Beacon

interval:

RTS Threshold:

Fragmentation:

DTIM Interval:

Preamble Type:

CTS Mode:

Advanced Wireless

This window allows you to change the behavior of the 802.11g wireless radio from the standard settings. Please be aware that any changes

to the factory default settings may adversely affect the behavior of your network.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 100 101

Keine Kommentare

D-Link DIR-615 Bedienungsanleitung Seite 38