D-Link DIR-615 Bedienungsanleitung PDF herunterladen (Seite 24)

20D-Link DIR-615 User Manual

Section 3 - Conﬁguration

Dynamic IP Address (DHCP)

Select Dynamic IP (DHCP) to obtain IP Address

information automatically from your ISP. Select

this option if your ISP does not give you any IP

numbers to use. This option is commonly used

for Cable modem services.

The Host Name is optional but may be required

by some ISPs.

Check the box if you are having problems

obtaining an IP address from your ISP.

Enter the Primary DNS server IP address

assigned by your ISP.

Maximum Transmission Unit - you may need to change the MTU for optimal performance with your speciﬁc ISP. 1500 is the

default MTU.

The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not

recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC’s

MAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card.

My Internet

Connection:

Host Name:

MAC Address:

DNS Addresses:

MTU:

Use Unicasting:

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 116 117

Keine Kommentare

D-Link DIR-615 Bedienungsanleitung Seite 24