D-Link DWL-700AP Bedienungsanleitung PDF herunterladen (Seite 13)

Using the Configuration Utility (continued)

Home > DHCP

DHCP Server: Select Enabled or Disabled. Disabled is the default setting. If you

want to use the access point as a DHCP server to automatically assign dynamic IP

addresses on the network, you will select Enabled.

Starting IP Address: If you have enabled the DHCP server function, enter the

starting point of the IP address range for your network.

Ending IP Address: Enter the ending IP address of your IP address range, if you

have enabled the DHCP function of the access point.

Lease Time: Choose the length of time during which the DHCP function of the

DWL-700AP automatically regenerates the IP addresses to the devices in your

network.

DHCP Client Table: Lists the devices on your network that are receiving dynamic

IP addresses from the access point.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 43 44

Keine Kommentare

D-Link DWL-700AP Bedienungsanleitung Seite 13