D-Link DI-304M Betriebsanweisung PDF herunterladen (Seite 34)

Component Detailed Description

Base Station Front Panel

Front Panel Section E – Status/Power Indicators

Fig. 3-20: Status/Power Indicators

•16 - Status Indicators

• BASE POWER - indicates the status of all power levels in the Base Station.

• Green when all power levels are normal.

• Red when any power level is not normal.

•

SYSTEM LOCK - indicates that the Base Station is communicating with the Camera

Unit.

• Green when communicating with Camera Unit.

• Red when it is not communicating with the Camera Unit.

•

FIBER LINK - indicates the optical power status of the Base Station and camera (see

A Brief Guide to Measurement of Fiber Optic Signal Strength on page 69).

• Green when both the Base Station and Camera Unit optical power are within

the specified operating power range. (-4 to -22 dBm).

• Orange when the Base Station’s received optical power is below the specified

operating power range and video quality may be affected (-22dBm to -23dBm).

• Red when both the Base Station and camera optical power are below specified

optical power range (less than -23 dBm).

•

ALARM - indicates that some error condition exists in either the Base Station or the

Camera Unit.

• Red if there is a Base Station error (see The CopperHead 3400 Base Station

Digital Display on page 70).

• Orange if there is a Camera Unit error (see The CopperHead 3400 Camera Unit

Digital Display on page 74).

• 17 - Hybrid Power Indicators: Hybrid Power indicators are only applicable to units with

the internal power supply (for configurations using the HDX or MPS power supplies –

see Connecting the Transceiver System on page 45).

• CAMERA POWER - indicates that high voltage is applied to power the camera.

• Green when high voltage is being supplied to the camera.

• Off when there is no high voltage applied to the camera

Note: HybridPowerIndicatorsarepresentonlyonahybridpowerunit

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 116 117

Keine Kommentare

D-Link DI-304M Betriebsanweisung Seite 34