D-Link DSL-2750E Betriebsanweisung PDF herunterladen (Seite 40)

40DSL-2750B User Guide

Port Triggering

The Port Triggering feature allows you to forward a range of ports to an IP address on your local network (LAN)

only after specic outbound trac is detected. You can set up a port triggering entry based on your specic

ports.

IMPORTANT: Using various Internet applications depends on the Router’s rewall settings. Make sure that the

Router’s rewall is set to Medium Security or lower to take advantage of all the port forwarding features.

Firewall settings take precedence over port forwarding services congured in the Router. For example, if the

rewall is set to Medium Security, this will block ICMP packets even if the ICMP service is enabled. If a port

forwarding service is not working, try setting the rewall to a lower setting.

Protocol:

Outgoing Trigger Ports:

Incoming Ports to

Open:

Action:

Add:

Displays the protocol/service. Check the box to activate the rule.

Displays the outgoing port(s) and protocol(s) used by the application.

Displays the incoming port(s) and protocol(s) opened by the application.

Click the red X to delete the rule.

Select a service/application from the drop-down menu to add.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 94 95

Keine Kommentare

D-Link DSL-2750E Betriebsanweisung Seite 40