D-Link DSL-4730B Spezifikationen PDF herunterladen (Seite 6)

Connections

Reset Button – press this button to revert to the factory default settings of

the DWL-810

Power Receptor – connect one end of the included 5V DC Power Adapter

into the power receptor on the DWL-810 and connect the other end of the

Power Adapter to a power outlet.

Default Settings

Operating Mode Ad-Hoc

SSID default

Channel 6

Transmission rates Auto

Encryption Disabled

IP Address 192.168.0.30

IP Subnet 255.255.255.0

User Name Admin (all lower case)

Password None (leave field blank)

Ethernet Port

Reset Button

Power Receptor

Category 5 is the most reliable grade of twisted-pair cable. It is either Straight-

Through cable or Cross-Over cable. Always check your installation instructions

to make sure that you have selected the correct type of Category 5 cable.

For the DWL-810, you will use Cross-Over cable to connect to a computer

for configuration and to connect to any device with an Ethernet adapter.

Use a Straight-Through cable to connect the DWL-810 directly to a switch.

Ethernet Port – an RJ-45 jack

provides connection to a network

device using a Cat 5 Ethernet

cable. (Use the included

Cross-Over CAT5 cable when

connecting to another Ethernet

adapter, like the port in a gaming

console; use a Straight-Through

CAT5 cable when connecting to a

switch.)

1 2 3 4 5 6 7 8 9 10 11 ... 24 25

Keine Kommentare

D-Link DSL-4730B Spezifikationen Seite 6