D-Link DVA-G3340S Installationsanleitung PDF herunterladen (Seite 51)

opt to indicate a Mask Range, a Single IP, an IP Range or Any

IP from the pull-down menu.

Source Port

The Source Port is the TCP/UDP port on either the LAN or

WAN depending on if you are configuring an Outbound or

Inbound Filter rule. Select one of the following options from the

pull-down menu to define a Any Port, Single Port, Port Range

or Safe Range (ports above 1024).

Destination Port

The Destination Port is the TCP/UDP port on either the LAN or

WAN depending on if you are configuring an Outbound or

Inbound Filter rule. Select one of the following options from the

pull-down menu to define a Any Port, Single Port, Port Range

or Safe Range (ports above 1024).

Protocol

Select the transport protocol (TCP, UDP or All) that will be used

for the filter rule.

Action

Select to Allow or Deny transport of the data packets

according to the criteria defined in the rule. Packets that are

allowed are routed to their destination; packets that are denied

are blocked.

Click the

Apply

button to put the new rule into effect. Any filter rule configured in the

menu will appear in the Filters List with the new settings. The Router must save the new

settings and reboot before the new rules are applied.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 80 81

Keine Kommentare

D-Link DVA-G3340S Installationsanleitung Seite 51