D-Link DP-802 Betriebsanweisung PDF herunterladen (Seite 62)

Internet/Print Server User’s Guide

Configuration Settings50

an IP address automatically” option under

TCP/IP will have to be selected.

Enable

Options: Yes/No

Default Value: Yes

Description: This setting is the “on/off” switch for using a

DHCP server. DHCP (Dynamic Host Configuration Protocol)

allows IP addresses to be dynamically assigned. Rather than

assigning a specific local IP address to each station, the inter-

net/print server will assign IPs to each station dynamically if

the DHCP server function is enabled.

IP Address Range -> Start

The range of IP addresses available to the internet/print server for

DHCP allocation is set using two settings. This is the first.

Options: Any IP address within the three reserved IP

ranges. The IP chosen must correlate with the End of the

range.

Default Value: 192.168.100.101

Must Be User Modified? No.

Description: This setting indicates the beginning of the

range of IP addresses available for DHCP use in assigning IPs.

It is paired with the next setting to create an address range.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 99 100

Keine Kommentare

D-Link DP-802 Betriebsanweisung Seite 62