D-Link DNR-322L Bedienungsanleitung PDF herunterladen (Seite 37)

33D-Link DNR-322L User Manual

Section 3 - Conguration

Select this connection if you have a DHCP server

running on your network and would like a

dynamic IP address to be automatically updated

to your NVR.

You may obtain a static or xed IP address and

other network information from your network

administrator for your NVR. A static IP address

will simplify access to your NVR in the future.

The xed IP address.

The default value“255.255.255.0” is used to

determine if the destination is in the same

subnet.

The gateway forwards frames to destinations in

a dierent subnet. Invalid gateway settings may

cause the failure of transmissions to a dierent

subnet.

Primary domain name server that translates

names to IP addresses.

Secondary domain name server to backup the primary one.

Enable this setting if your ISP (DSL service) is using PPPoE. You may already have a Username and Password provided by your ISP,

or you may need to contact your ISP. The connection status will be determined automatically by the system.

Enable or disable the DHCP server. If your network doesn’t have DHCP server, enable NVR DHCP server for easier local network setup.

Network Setup

DHCP:

Static IP:

IP Address:

Subnet Mask:

Gateway IP

Address:

DNS1:

DNS2:

PPPoE

Settings:

DHCP server:

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 92 93

Keine Kommentare

D-Link DNR-322L Bedienungsanleitung Seite 37