D-Link DIR-601 Bedienungsanleitung PDF herunterladen (Seite 48)

44D-Link DIR-601 User Manual

Section 3 - Conguration

Enter a name for the rule. You may select a pre-dened

application from the drop-down menu and click <<.

This is the port used to trigger the application. It can

be either a single port or a range of ports.

Select the protocol of the trigger port (TCP, UDP, or

Both).

This is the port number on the Internet side that will

be used to access the application. You may dene a

single port or a range of ports. You can use a comma

to add multiple ports or port ranges.

Select the protocol of the rewall port (TCP, UDP, or

Both).

The schedule of time when the Application Rule

will be enabled. The schedule may be set to Always,

which will allow the particular service to always be

enabled. You can create your own times in the Tools

> Schedules section.

Name:

Trigger:

Trac Type:

Firewall:

Trac Type:

Schedule:

Application Rules

Some applications require multiple connections, such as Internet gaming, video conferencing, Internet telephony and others. These applications

have diculties working through NAT (Network Address Translation). Special Applications makes some of these applications work with the DIR-601.

If you need to run applications that require multiple connections, specify the port normally associated with an application in the “Trigger Port” eld,

select the protocol type as TCP or UDP, then enter the rewall (public) ports associated with the trigger port to open them for inbound trac.

The DIR-601 provides some predened applications in the table on the bottom of the web page. Select the application you want to use and enable

it.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 114 115

Kommentare zu diesen Handbüchern

Keine Kommentare

D-Link DIR-601 Bedienungsanleitung Seite 48

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für WLAN-Zugangspunkte D-Link DIR-601