D-Link DWL-1750 Bedienungsanleitung

ManualBuilding Networks for PeopleOutdoor 2.4 GHz Wireless Router/BridgeD-Link AirPremier DWL-1750This product should be installed ONLY by

10For more information regarding installation, please see the sections on Grounding and Connections in this manual, and the Quick Installation Guide t

11Using the Configuration Utility To configure the DWL-1750, use a computer which is connected to the DWL-1750 with an Ethernet cable (see the Network L

12Note: if you have changed the default IP Address assigned to the DWL-1750, make sure to enter the correct IP Address. Home > WizardThe H o m e

13Using the Configuration Utility (continued)Home > Wireless Apply- Click Apply to save the changesKeys 1-4- Input up to 4 WEP keys; select the one

14Using the Configuration Utility (continued)Home > Mode > Central Dynamic IP RouterSelect Central Dynamic IP Router if you are locating the rout

15Using the Configuration Utility (continued)Home > Mode > Central Static IP RouterSelect Central Static IP Router mode if the DWL-1750 will

16Subnet Mask-Using the Configuration Utility (continued)Home > Mode > Central PPPoE Router > Dynamic or Static PPPoESelect Central PPPoE Rout

17Using the Configuration Utility (continued)Home > Mode > Remote Static IP Router Select this option to input the Remote Static IP Address provi

18Using the Configuration Utility (continued)Home > Mode > Remote BridgeInput the IP Address assigned by your ISPIP Address-Bridge IPInput the Su

19Using the Configuration Utility (continued)Home > Mode > Central BridgeInput the IP Address assigned by your ISPIP Address-Bridge IPInput the S

2ContentsPackage Contents ... 3Introduction ...

20Using the Configuration Utility (continued) Home > DHCPDHCP stands for Dynamic Host Control Protocol. The DWL-1750 has a built-in DHCP server. Th

21Using the Configuration Utility (continued) Advanced > Virtual ServerThe DWL-1750 can be configured as a Virtual Server so that remote users acces

22Using the Configuration Utility (continued) Advanced > FiltersFilters are used to deny or allow LAN computers from accessing the Internet using t

23Using the Configuration Utility (continued)Advanced > FirewallFirewall Rules is an advanced feature that is used to deny or allow traffic that pas

24Using the Configuration Utility (continued)Advanced > PerformanceSSID Broadcast- Enable the SSID Broadcast feature to announce the SSID ac

25Using the Configuration Utility (continued)Advanced > RoutingEnter the Network IP AddressNetwork Address - Subnet Mask - Gateway Address - Enter t

26Using the Configuration Utility (continued)Advanced > SNMPSNMP (Simple Network Management Protocol) is a widely used network monitoring and contro

27Using the Configuration Utility (continued)Advanced > Anti-DoSSelect one or more of these options to reject DoS (Denial of Service) attacks. Some

28Using the Configuration Utility (continued)Tools> AdminAt this page, the DWL-1750 administrator can change the system password. Retype the passwor

29Using the Configuration Utility (continued)Tools > SystemThe current system settings can be saved as a file onto the local hard drive. The saved fil

3Contents of Package: D-Link AirPremier DWL-1700AP Outdoor 2.4GHz Wireless Access Point Inline Power Injector AC Power Cord MIL-C-5015 style RS23

30Using the Configuration Utility (continued)Tools > FirmwareFirmware Upgrade- TFTP Server IP- Click on the link in this screen to find out if there

31Using the Configuration Utility (continued)Status > Device InfoThe Device Info screen displays information about the DWL-1750.

32Using the Configuration Utility (continued)Status > WirelessThe screen above displays the Wireless Status and the length of time of the current co

33Using the Network Setup Wizard in Windows XPIn this section you will learn how to establish a network at home or work, using Microsoft Windows XP.

34 Please follow all the instructions in this window:Networking Basics (continued)Click NextIn the following window, select the best description of yo

35Enter a Computer description and a Computer name (optional.)Networking Basics (continued)Click NextEnter a Workgroup name. All computers on your ne

36Please wait while the Network Setup Wizard applies the changes.Networking Basics (continued)When the changes are complete, Click Next.Please wait wh

37Networking Basics (continued)In the window below, select the option that fits your needs. In this example, Create a Network Setup Disk has been selec

38Networking Basics (continued)Please read the information under Here’s how in the screen below. After you complete the Network Setup Wizard you will

39Networking Basics (continued) Please read the information on this screen, then click Finish to complete the Network Setup Wizard.The new settings wi

4IntroductionThe DWL-1750 conforms to the 802.11 standard and covers a large operating distance, providing an 11Mbps* outdoor WLAN which enables users

40Networking Basics (continued)Naming your ComputerTo name your computer, please follow these directions:(In Windows XP)Click Start (in the lower left

41Networking Basics (continued)Naming your Computer In this window, enter the Computer nameSelect Workgroup and enter the name of the WorkgroupAll

42Networking Basics (continued) Checking the IP Address in Windows XPThis window will appear.Click the Support tabClick Close  Assigning a Static I

43Networking Basics (continued)Assigning a Static IP Address in Windows XP/2000 Double-click on Network Connections  Double-click on Properti

44 Input your IP Address and subnet mask. (The IP Addresses on your network must be within the same range. For example, if one computer has an IP Addr

45Networking Basics (continued) Assigning a Static IP Address with Macintosh OSX      Go to the Apple Menu and select System Pr

46Networking Basics (continued) Selecting a Dynamic IP Address with Macintosh OSXGo to the Apple Menu and select System PreferencesClick on NetworkSel

47Networking Basics (continued) Checking the Wireless Connection by Pinging in Windows XP and 2000Checking the Wireless Connection by Pinging in Windo

48Q1: How do I configure Static Routing on the DWL-1750?A: The DWL-1750 supports the Static Route function; refer to the following descriptions to confi

49Frequently Asked Questions (continued)Remarks: - Actual Clearance is > 32.8 feet (10m.) - Distances over 25 Miles (40km) are very difficult to a

5ConnectionsSpecial Ethernet PortConnect one end of the MIL-C-5015 Ethernet Cable into this port; connect the other end into the Power and Data Output

501. The computer used to configure the DWL-1750 cannot access the Configuration menu. Check that the Ethernet Cable is being used correctly. The Cross

51 2. The wireless client cannot access the Internet in the Infrastructure mode.Make sure the wireless client is associated

52Troubleshooting (continued)Click Device Manager  Select the Hardware Tab  Go to Start > My Computer > PropertiesCheck to make sure

53Troubleshooting (continued)     Double-click on Network AdaptersRight-click on D-Link AirPlus DWL-G650 Wireless Cardbus Adapter (In t

54• Locate the Reset button on the back of the DI-764• Use a paper clip to press the Reset button. • Hold for about 10 seconds and then release •

55Appendix 1:Telnet ConfigurationThe DWL-1750 is designed to operate as shipped from the factory without any special set-up. However, it has many optio

56Telnet Configuration (continued)Enter the User Name and User Password as shown below. (The default User Name is user1 and the default User Password i

573. The structure of the menu tree is shown on the following page. Users can use the following keys to select the parameter to change or add.  Up/

58Telnet Configuration (continued)

59Telnet Configuration (continued)

6GroundingOutdoor Installation The DWL-1750 can be mounted on the side of a building or mounted to a mast as shown above. A wall mount is a con

60Telnet Configuration (continued)

61Telnet Configuration (continued)

62Telnet Configuration (continued)

63Telnet Configuration (continued)

64Appendix 2:Boot Code Firmware UpgradeThis procedure is optional. If you wish to upgrade the Boot Code, check the D-Link support website to see if th

65After the Hyper Terminal window appears:Give this new connection a name. (e.g., DWL-1750)Boot Code Firmware Upgrade (continued)Select corect COM por

66Boot Code Firmware Upgrade (continued)Set baud rate as 115200, and flow control as None. Then press OK to bring up the HyperTerminal window.Press Esc

67Boot Code Firmware Upgrade (continued)Key-in DLX and press Enter. When CCC... appears, select Transfer > Send File.Set Protocol as 1K Xmodem.Key-

68Boot Code Firmware Upgrade (continued) When XMODEM End of Transfer & ERASE ROOT FW (X.BIN) NOW (Y/y): appears, type Y to update Flash.Upon comp

69Boot Code Firmware Upgrade (continued)Key-in reboot and press Enter to let the new boot code activate. After rebooting and when showing EDORAM Test

7 The construction of the mast must be of a sturdy, weatherproof and no corrosive material like examples of galvanized or stainless steel constructio

70Key-in DLS and press Enter, the following warning will appear:Warning!! Main program will be overwritten!!Press Y (in upper case) to proceed...Press

71Boot Code Firmware Upgrade (continued)Key-in DLP and press Enter to erase the old Web image and when CCC... appears, select Transfer > Send File.

72Boot Code Firmware Upgrade (continued)Key in DLB and press Enter to upgrade the BIOS. When CCC... appears, select Transfer > Send File. Set Proto

73Boot Code Firmware Upgrade (continued)When XMODEM End of Transfer and Erase Root FW (X.BIN) NOW ( Y/y): appears, type Y to update Flash.After a succ

74D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, bu

75Wireless Basics (continued)People use WLAN technology for many different purposes:Mobility - Productivity increases when people have access to data

76IEEE 802.11b Direct Sequence Spread Spectrum (DSSS)Technical Specifications StandardsDevice ManagementWeb-Based- Internet Explorer v6 or later; Nets

77Transmit Power (excluding external antenna):23dBm (200mW typically)  Technical Specifications (continued) Physical Dimensions:L = 9.57 inch

78 Technical Specifications (continued)Warranty:1 year Weight:16.53 lbs. (7.5kg) Security:64/128-bit WEP (RC4) MAC Address based access cont

79You can find software updates and user documentation on the D-Link website.D-Link provides free technical support for customers within the United St

8Features Better security   Compatible with the 802.11b standard to provide a wireless data rate of up to 11Mbps.Ideal for Internet Hotspots- Provid

80Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited warranty for its product only to the per

81• The original product owner must obtain a Return Material Authorization (“RMA”) number from the Authorized D-Link Service Office and, if

82Limitation of Liability: TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDER ANY CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER LEGA

9Mount the DWL-1750 to an unobstructed wall or mast. Make sure that is is grounded.Connect the DWL-1750 to the Inline Power InjectorConnect a Hub, Swi