D-Link DWL-510 Installationsanleitung PDF herunterladen (Seite 40)

Using the Conﬁguration Utility in Router Mode (continued)

Home > DHCP

DHCP stands for Dynamic Host

Control Protocol.

The DWL-G730AP has a built-

in DHCP server. The DHCP

Server will automatically assign

an IP address to the computers

on the LAN/private network. Be

sure to set your computers to

be DHCP clients by setting their

TCP/IP settings to “Obtain an IP

Address Automatically.” When

you turn your computers on, they

will automatically load the proper

TCP/IP settings provided by the

DWL-G730AP. The DHCP server

will automatically allocate an

unused IP address from the IP

address pool to the requesting

computer. You must specify the

starting and ending address of the IP address pool.

DHCP Server-

Select Enabled or Disabled. The default setting is Enabled.

Starting IP Address-

The starting IP address for the DHCP server’s IP assignment.

Ending

IP Address-

The ending IP address for the DHCP server’s IP assignment.

Lease Time-

The length of time for the IP lease. Enter the Lease time. The

default setting is one hour.

Static DHCP is used to allow the DHCP server to assign some Static IP

addresses via speciﬁc MAC addresses.

Static DHCP-

Select Enabled or Disabled.

Name-

IP-

MAC Address-

DHCP Client-

Enter a name here.

Enter the last digits of the IP address here.

Enter the MAC address of the computer that will be assigned

the Static DHCP IP address.

Use this pull-down list to list DHCP clients on your network. To

copy the MAC address into the MAC address section above,

simply select the client from the pull-down list and click the

Clone button.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 78 79

Kommentare zu diesen Handbüchern

Keine Kommentare

D-Link DWL-510 Installationsanleitung Seite 40

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für WLAN-Zugangspunkte D-Link DWL-510