D-Link DWL-7100AP Bedienungsanleitung PDF herunterladen (Seite 14)

14D-Link DWL-7100AP User Manual

Access Point Mode

Access Point is selected from the drop-down

menu.

Service Set Identiﬁer (SSID) is the name designated

for a speciﬁc wireless local area network (WLAN).

The SSID’s factory default setting is dlink. The SSID

can be easily changed to connect to an existing

wireless network or to establish a new wireless

network.

Enable or Disable SSID broadcast. Enabling this

feature broadcasts the SSID across the network.

Auto Channel Scan is enabled by default. All

devices on the network must share the same

channel.

The radio frequency will vary depending on the

wireless channel that is chosen.

Select Open System to communicate the key across the network.

Select Shared Key to limit communication to only those devices that share the same WEP settings.

Select Open System/Shared Key to allow either form of data encryption.

Select WPA-EAP to secure your network with the inclusion of a RADIUS server.

Select WPA-PSK to secure your network using a password and dynamic key changes (No RADIUS server required).

Select WPA2-EAP to secure your network with the inclusion of a RADIUS server and upgrade the encryption of data with

the Advanced Encryption Standard (AES).

Mode:

SSID:

SSID Broadcast:

Channel:

Authentication:

Wireless Band:

Select IEEE802.11a or IEEE802.11g.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 95 96

Keine Kommentare

D-Link DWL-7100AP Bedienungsanleitung Seite 14