1. If the speed of fiber port for DGS-1500 is set at auto
mode and link partner is set at forced mode. The
connection still works. Under normal situation, the
connection should be failed.
2. When power saving is enabled, the link status of
uplink ports will be changed as linked up linked
down linked up in very short time.
3. The group interval is inaccurate if users set at 1225
sec.
4. The link status of link partner will be changed if users
enable or disable “LED Shut-off” of advanced power
saving feature.
5. It will take about 10 sec. waiting time to display total
2000 VLAN groups in Web GUI.
6. The learned MAC address of fiber port could be taken
out when a new fiber port linked up.
7. When two ports transmit packets to the same
destination port, the received rate could be
inaccurate.
8. The threshold of Storm Control has deviation. The
maximum deviation happened on the 64Kbps
threshold.
9. When performing Cable Diagnostics, the port will be
shut down and then linked up in very short time.
Kommentare zu diesen Handbüchern