D-Link DCS-2100+ Bedienungsanleitung PDF herunterladen (Seite 82)

DCS-2100 User’s Manual

D-Link Systems, Inc.

Using IP Surveillance Software

The Admin Privilege

In the Monitor program, the admin has the right to access the DCS-2100 Network Camera

through this application software and change the local settings as well. But the admin

password for the software is not the same as the admin password for the Internet camera.

You can change the settings of each selected Internet camera from the Monitor program

only if you have the admin password for the Internet camera.

If you have the admin privilege, you have the right to do the following tasks:

Again, if you need to change the settings of the DCS-2100, you must have the

administrator’s password for the camera itself.

Camera Configurations

When you log in for the first time, you should configure this application software to

connect the DCS-2100 in “Configuration Menu > Camera Configurations”, shown in

the figure below. You will need the admin (administrator) password of the camera in

order to run the configuration.

Once you click “Configuration Menu > Camera Configurations” for setting each

camera, all recording processes will be stopped indicated by a warning window popped

up in advance to keep you informed.

 Run the configuration tool

 Change the recording schedule

 Change the local settings

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 137 138

Keine Kommentare

D-Link DCS-2100+ Bedienungsanleitung Seite 82