D-Link DCS-7110 Bedienungsanleitung PDF herunterladen (Seite 33)

33D-Link DCS-7110 User Manual

Conguration

Once nished with the setting in the Viewing Window, click Save to enable the

settings and click Close to exit the window. The selected Output Frame Size

will immediately be applied to the Frame size of video stream. You can then

go back to the Live Video to test the new settings.

Sensor Setting: Click Sensor Setting to open the Sensor Setting page. On

this page, you can set the maximum exposure time, exposure level, and AGC

(Auto Gain Control) setting. You can congure two sets of sensor setting:

one for normal situations, the other for special situations, such as day/night/

schedule mode.

Exposure

• Maximum Exposure Time: Select a proper maximum exposure time

according to the light source of the surroundings. Shorter exposure times

result in less light reaching the sensor. The exposure times are selectable

for the following durations: 1/30 second, 1/15 second, and 1/5 second.

• Exposure level: You can manually set the Exposure level which ranges

from 1 to 8 (dark to bright).

• Max. Gain (Auto Gain Control): You can manually set the AGC level (2X

4X, or 8X). The higher the value, the brighter the image will be.

• Enable BLC (Back Light Compensation): Enable this option when the

object is too dark or too bright to recognize. It allows the camera to adjust

to the best light conditions in any environment and automatically give the

necessary light compensation.

You may click Preview to ne-tune the image, or click Restore to recall the

original setting without incorporating the changes. When completed with

the setting on this page, click Save to enable the setting and click Close to

exit the page. If you want to congure another sensor setting for day/night/

schedule mode, please click Prole 2 and follow the steps below to setup:

1. Click Enable this prole.

2. Select the applied mode: Day mode, Night mode, or schedule mode.

Please manually enter a range of time if you choose Schedule mode.

3. Congure Exposure setting in the second column.

4. Click Save to enable the setting and click Close to exit the page.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 76 77

Keine Kommentare

D-Link DCS-7110 Bedienungsanleitung Seite 33