D-Link DCS-7110 Bedienungsanleitung PDF herunterladen (Seite 37)

37D-Link DCS-7110 User Manual

Conguration

Day and Night Settings

Switch to B/W in Night Mode: Select to automatically enable the camera to

switch to B/W night mode.

IR Cut Filter: The IR-Cut Removable (ICR) lter mechanically switches

between two different sensor lters. It provides the best light conditions both

during the day and night. The following options are:

• Auto Mode: The camera automatically switches between day and night

mode by judging the level of ambient light. This mode is accessible only

when the exposure mode is set to Auto.

• Day Mode: In this mode the camera switches on the IR cut lter at all

times, which will block the infrared light from reaching the sensor so that

the colors are not distorted.

• Night Mode: The camera switches off the IR cut lter to allow the infrared

light to pass through. This helps the camera to see more clearly in low light

conditions.

• Synchronize with Digital Input: The camera automatically removes the

IR cut lter when DI triggers.

• Schedule Mode: The camera switches between day and night mode

based on a specic schedule. Ensure to enter the starting and ending time

for the day mode. Note that the time format is [hh:mm] and is expressed

in 24-hour clock time. By default, the starting time and ending time of day

mode are set to 07:00 and 18:00.

Light Sensor Sensitivity: Select Low, Normal, or High sensitivity for the light

sensor.

Disable IR LED: Select this box to disable the IR LED. The IR LED

automatically switches on at night. By default the LED automatically switches

on at night.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 76 77

Keine Kommentare

D-Link DCS-7110 Bedienungsanleitung Seite 37