D-Link DWC-1000 Bedienungsanleitung PDF herunterladen (Seite 5)

D-Link AU/NZ Technical Support – Setup Guide Page 5 of 12

4. Assign IP Subnets to VLANs.

Go to VLAN Settings > Multiple VLAN subnets. Select the Guest VLAN and click Edit.

Change the Staff VLAN’s IP address to the IP from the subnet you are going to use for Staff.

In our example it is 192.168.2.0/24.

Change the Guest VLAN’s IP address to the IP from the subnet you are going to use for

Guests. In our example it is 192.168.3.0/24.

Set DHCP Mode to DHCP SERVER. Specify the IP settings of DHCP server. Note that Default

Gateway should be the IP address of the corresponding VLAN interface (192.168.2.1 for Staff

and 192.168.3.1 for Guest).

1 2 3 4 5 6 7 8 9 10 11 12

Keine Kommentare

D-Link DWC-1000 Bedienungsanleitung Seite 5