D-Link DWC-1000 Bedienungsanleitung PDF herunterladen (Seite 9)

D-Link AU/NZ Technical Support – Setup Guide Page 9 of 12

7. Set the DWC-1000 controller to push configuration profile to your Access Points.

Connect your Access Points to LAN. In your DWC-1000 Controller go to Status > Access Point

> Authentication Failure Status. Your Access Points will be listed in the table.

Select an AP and click Manage. Select the desired profile for the Access Point (in our example

we used the “Default” profile. Save Settings. Repeat for the remaining AP’s.

1 2 3 4 5 6 7 8 9 10 11 12

Keine Kommentare

D-Link DWC-1000 Bedienungsanleitung Seite 9