D-Link DWC-1000 Betriebsanweisung PDF herunterladen (Seite 114)

VPN Settings

114

DWC-1000 Wireless Controller User’s Guide

Table 6-2. Fields on the IPSEC MODE CONFIG Page

Field

Description

Tunnel Mode

Select a tunnel mode. Choices are:

 Full Tunnel = every packet destined to the Internet or remote server goes through the tunnel.

 Split Tunnel = traffic destined to the Internet does not pass through the tunnel.

Start IP Address

Enter the first address to be allocated in this pool.

End IP Address

Enter the last address to be allocated in this pool.

Primary DNS

Primary DNS server is used by clients connected to this router to resolve domain names. If

Tunnel Mode = Split Tunnel, the DNS server should be internal domain name server.

Secondary DNS

Secondary DNS Server is used by clients connected to this router to resolve domain names. If

Tunnel Mode = Split Tunnel, the DNS server should be internal domain name server.

Primary WINServer

Enter the primary Windows NetBIOS Name Server used by clients to resolve NetBIOS names.

Secondary WINServer

Enter the secondary Windows NetBIOS Name Server used by clients to resolve NetBIOS names.

Split DNS Names

In a split DNS infrastructure, you create two zones for the same domain, one to be used by the internal network and the other used by

the external network. Split DNS directs internal hosts to an internal domain name server for name resolution and external hosts are

directed to an external domain name server for name resolution.

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 245 246

Keine Kommentare

D-Link DWC-1000 Betriebsanweisung Seite 114