D-Link DAP-3690 Bedienungsanleitung PDF herunterladen (Seite 19)

19D-Link DAP-3690 User Manual

Section 3 - Conguration

WDS mode

In WDS mode, the DAP-3690 wirelessly connects multiple networks, without functioning as a wireless AP. After completing the desired settings,

click the Save button to let your changes take eect.

WDS is selected from the drop-down menu.

Service Set Identier (SSID) is the name designated for a specic

wirelesslocal areanetwork (WLAN).TheSSID’sfactory default

setting is dlink. The SSID can be easily changed to connect to an

existing wireless network or to establish a new wireless network.

Enable or Disable SSID visibility. Enabling this feature broadcasts

the SSID across the network, thus making it visible to all network

users.

Mode:

Network Name

(SSID):

SSID Visibility:

Wireless Band:

Select either 2.4 GHz or 5 GHz from the drop-down menu.

Auto Channel

Selection:

All devices on the network must share the same channel. To

change the channel, use the drop-down menu to make the

desired selection.

Enabling this feature automatically selects the channel that

will provide the best wireless performance. This feature is not

supported in WDS mode.

Channel:

Channel Width:

Allows selection of the channel width you would like to operate

in. 20 MHz and Auto 20/40 MHz allow both 802.11n and

non-802.11n wireless devices on your network when the wireless

modeisMixed802.11b/g/nin2.4GandMixed802.11a/nin5G.

802.11n wireless devices are allowed to transmit data using 40

MHzwhenthechannelwidthisAuto 20/40 MHz.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 87 88

Keine Kommentare

D-Link DAP-3690 Bedienungsanleitung Seite 19