D-Link DAP-3690 Bedienungsanleitung PDF herunterladen (Seite 27)

27D-Link DAP-3690 User Manual

Section 3 - Conguration

Choose Static IP (Manual) if you do not have a DHCP

server on your network, or if you wish to assign a static IP

address to the DAP-3690. When Dynamic IP (DHCP) is

selected, the other elds here will be grayed out. Please

allow about 2 minutes for the DHCP client to be functional

once this selection is made.

The default IP address is 192.168.0.50. Assign a static IP

address that is within the IP address range of your network.

Enter the subnet mask. All devices in the network must share the same subnet mask.

Enter the IP address of the gateway in your network. If there is a gateway in your network, please enter an IP address within the range

of your network.

LAN

Get IP From:

IP Address:

Subnet Mask:

Default

Gateway:

LAN is short for Local Area Network. This is considered your internal network. These are the IP settings of the LAN interface for the DAP-3690. These

settings may be referred to as private settings. You may change the LAN IP address if needed. The LAN IP address is private to your internal network

and cannot be seen on the Internet. After completing the desired LAN settings, click the Save button to let your changes take eect.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 87 88

Keine Kommentare

D-Link DAP-3690 Bedienungsanleitung Seite 27