D-Link DIR-320NRU Bedienungsanleitung PDF herunterladen (Seite 146)

DIR-320NRU Multifunction Wireless Router Supporting

WiMAX, 3G GSM/CDMA with Built-in Switch

User Manual

Configuring via Web-based Interface

System Log

On the System / System log page, you can set the system log options and configure sending the

system log to a remote host.

Figure 121. The System / System log page. The Configuration tab.

To enable logging of the system events, select the Logging checkbox on the Configuration tab.

Then specify the needed parameters.

Control Description

Logging type

Select a type of logging from the drop-down list.

• Local: the system log is stored in the router's memory (and

displayed on the Log tab). When this value is selected, the

Server address type, Server, and Port fields are not

displayed.

• Remote: the system log is sent to the remote host specified in

the Server field.

• Local and remote: the system log is stored in the router's

memory (and displayed on the Log tab) and sent to the

remote host specified in the Server field.

Logging level

Select a type of messages and alerts/notifications to be logged.

Server address type

From the drop-down list, select the IP value to specify an IP address

of a host from the local or global network, or the URL value to

specify a URL address of a remote server.

Server

The IP or URL address of the host from the local or global network,

to which the system log will be sent.

Port

A port of the host specified in the Server field. By default, the value

514 is specified.

After specifying the needed parameters, click the Change button.

Page 146 of 156

1 2 ... 141 142 143 144 145 146 147 148 149 150 151 ... 155 156

Keine Kommentare

D-Link DIR-320NRU Bedienungsanleitung Seite 146