D-Link DIR-320NRU Bedienungsanleitung PDF herunterladen (Seite 96)

DIR-320NRU Multifunction Wireless Router Supporting

WiMAX, 3G GSM/CDMA with Built-in Switch

User Manual

Configuring via Web-based Interface

LAN

To configure the router's local interface, proceed to the Net / LAN page.

Figure 79. The page for configuring the local interface.

If needed, edit the basic parameters of the local interface.

Parameter Description

IP Address

The IP address of the router in the local subnet. By default, the

following value is specified: 192.168.0.1.

Netmask

The mask of the local subnet. By default, the following value is

specified: 255.255.255.0.

When needed settings are configured, click the Save button.

In the Static DHCP section, you can specify MAC address and IP address pairs (set a fixed IP

address in the local area network for a device with a certain MAC address). The router assigns IP

addresses in accordance with the specified pairs only when the DHCP server is enabled (in the

DHCP server section, in the Mode drop-down list, the Enable value is selected).

To create a MAC-IP pair, click the Add button and specify the following parameters:

Parameter Description

IP address

An IP address which will be assigned to the device with the

specified MAC address.

MAC address The MAC address of the device from the LAN.

Host name

A network name of the device for easier identification. Optional.

When all needed MAC-IP pairs are specified, click the Save button.

Page 96 of 156

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 155 156

Keine Kommentare

D-Link DIR-320NRU Bedienungsanleitung Seite 96