D-Link DIR-320NRU Bedienungsanleitung PDF herunterladen (Seite 97)

DIR-320NRU Multifunction Wireless Router Supporting

WiMAX, 3G GSM/CDMA with Built-in Switch

User Manual

Configuring via Web-based Interface

Existing MAC-IP pairs are displayed in the table of the Static DHCP section. To remove a pair,

select the relevant line in the table and click the Remove button. Then click the Save button.

In the DHCP server section, you can configure the built-in DHCP sever of the router.

Parameter Description

Mode

An operating mode of the router's DHCP server.

Enable: the router assigns IP addresses to clients automatically in

accordance with the specified parameters. When this value is

selected, the Start IP, End IP, and the Lease time fields are

displayed on the page.

Disable: the router's DHCP server is disabled, clients' IP addresses

are assigned manually.

Relay: an external DHCP server is used to assign IP addresses to

clients. When this value is selected, the External DHCP server IP

field is displayed on the page.

Start IP

The start IP address of the address pool used by the DHCP server to

distribute IP addresses to clients.

End IP

The end IP address of the address pool used by the DHCP server to

distribute IP addresses to clients.

Lease time

The lifetime of IP addresses leased by the DHCP server. At the end

of this period the leased IP address is revoked and can be distributed

to another device, unless the previous device has confirmed the need

to keep the address.

External DHCP server IP

The IP address of the external DHCP server which assigns IP

addresses to the router's clients.

When all needed settings are configured, click the Save button.

Page 97 of 156

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 155 156

Keine Kommentare

D-Link DIR-320NRU Bedienungsanleitung Seite 97