D-Link xStack Betriebsanleitung PDF herunterladen (Seite 103)

DES-3010F/G / DES-3018 / DES-3026 Fast Ethernet Switch Manual

Configure the following 802.1x capability settings:

Parameter Description

From and To

Ports being configured for 802.1x settings.

Capability

Two role choices can be selected:

Authenticator - A user must pass the authentication process to gain access to the

network.

None - The port will not be controlled by the 802.1x functions.

Initializing Ports for Port Based 802.1x

Existing 802.1x port and MAC settings are displayed and can be configured using the window below.

Click Security > 802.1X > Initialize Ports to view the following window:

Figure 9- 15. Initialize Port window

This window allows you to initialize a port or group of ports. The Initialize Port Table in the bottom half of the window

displays the current status of the port(s).

This window displays the following information:

Parameter Description

From and To

Select ports to be initialized.

Port

A read only field indicating a port on the Switch.

MAC Address

The MAC address of the Switch connected to the corresponding port, if any.

Auth PAE State

The Authenticator PAE State will display one of the following: Initialize, Discon-

nected, Connecting, Authenticating, Authenticated, Aborting, Held, ForceAuth or

ForceUnauth.

102

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 185 186

Keine Kommentare

D-Link xStack Betriebsanleitung Seite 103