D-Link xStack Betriebsanleitung PDF herunterladen (Seite 49)

DES-3010F/G / DES-3018 / DES-3026 Fast Ethernet Switch Manual

SNTP Settings

Time Setting

To configure the time settings for the Switch, open the Administration folder, then the SNTP folder and click on the

Time Setting link, revealing the following screen for the user to configure.

Figure 6- 11. Current Time Settings window

The following parameters can be set or are displayed:

Parameter Description

Time Settings - Current Time

Current Time

Displays the current time.

Time Source

Displays the source of the time settings viewed here.

SNTP Settings

SNTP State

Use this pull-down menu to Enable or Disable SNTP.

SNTP Primary Server

The IP address of the primary server the SNTP information will be taken from.

SNTP Secondary

Server

The IP address of the secondary server the SNTP information will be taken from.

SNTP Poll Interval in

Seconds

The interval, in seconds, between requests for updated SNTP information.

Time Settings - Set Current Time

Year

Enter the current year, if you want to update the system clock.

Month

Enter the current month, if you would like to update the system clock.

Day

Enter the current day, if you would like to update the system clock.

Time in HH MM SS

Enter the current time in hours and minutes, if you would like to update the system

clock.

Click Apply to implement your changes.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 185 186

Keine Kommentare

D-Link xStack Betriebsanleitung Seite 49