D-Link xStack Betriebsanleitung PDF herunterladen (Seite 64)

DES-3010F/G / DES-3018 / DES-3026 Fast Ethernet Switch Manual

Discovery Interval

The user may set the discovery protocol interval, in seconds that the Switch will send

out discovery packets. Returning information to a Commander Switch will include

information about other switches connected to it. (Ex. MS, CaS). The user may set the

Discovery Interval from 30 to 90 seconds.

Holdtime

This parameter may be set for the time, in seconds the Switch will hold information

sent to it from other switches, utilizing the Discovery Interval. The user may set the

hold time from 100 to 255 seconds.

Click Apply to implement the settings changed.

Forwarding & Filtering

Unicast Forwarding

Open the Forwarding & Filtering folder in the Administration menu and click on the Unicast Forwarding link. This

will open the Setup Static Unicast Forwarding Table, as shown below:

Figure 6- 29. Unicast Forwarding Table and Static Unicast Forwarding Table window

To add or edit an entry, define the following parameters and then click Add/Modify:

Parameter Description

VLAN ID (VID)

The VLAN ID number of the VLAN on which the above Unicast MAC address

resides.

MAC Address

The MAC address to which packets will be statically forwarded. This must be a

unicast MAC address.

Port

Allows the selection of the port number on which the MAC address entered above

resides.

Click Apply to implement the changes made. Current entries can be found in the Static Unicast Forwarding Table as

shown in the bottom half of the figure above. To delete an entry in the Static Unicast Forwarding Table, click the

corresponding

under the Delete heading.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 185 186

Keine Kommentare

D-Link xStack Betriebsanleitung Seite 64