D-Link DSA-3200 Technical Information PDF herunterladen (Seite 103)

xStack

DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide

IPv4 Max Multicast Group Settings

Users can configure the ports and VLANs on the switch that will be a part of the maximum filter group, up to a maximum of

1024.

To view the following window, click L2 Features > Multicast Filtering > IPv4 Multicast Filtering > IPv4 Multicast Group

Settings:

Figure 3 - 57. IPv4 Max Multicast Group Settings window

The following parameters can be configured:

Parameter Description

Ports / VID List

Select the appropriate port(s) or VLAN IDs used for the configuration here.

Max Group (1-1024) If the checkbox Infinite is not selected, the user can enter a Max Group value.

Infinite

Tick the check box to enable or disable the use of the Infinite value.

Action

Use the drop-down menu to select the appropriate action for this rule. The user can

select Drop to initiate the drop action or the user can select Replace to initiate the

replace action.

Click the Apply button to accept the changes made. Click the Find button to locate a specific entry based on the information

entered. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

Multicast Filtering Mode

Users can configure the multicast filtering mode.

To view the following window, click L2 Features > Multicast Filtering > IPv4 Multicast Filtering > Multicast Filtering

Mode:

Figure 3 - 58. Multicast Filtering Mode window

Parameter Description

VLAN Name / VID List

The VLAN to which the specified filtering action applies. Select the All option to apply the

action to all VLANs on the Switch.

Filtering Mode

This drop-down menu allows you to select the action the Switch will take when it receives a

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 320 321

Keine Kommentare

D-Link DSA-3200 Technical Information Seite 103