D-Link DSA-3200 Technical Information PDF herunterladen (Seite 142)

xStack

DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide

128

Figure 6 - 1. Authentication RADIUS Server Settings window

The following parameters can be configured:

Parameter Description

Index Choose the desired RADIUS server to configure: 1, 2 or 3 and select either IPv4 Address

or IPv6 Address.

IPv4 Address

Click the radio button and set the RADIUS server IPv4 address.

IPv6 Address

Click the radio button and set the RADIUS server IPv6 address.

Authentication Port

(1-65535)

Set the RADIUS authentic server(s) UDP port which is used to transmit RADIUS data

between the Switch and the RADIUS server. The default port is 1812.

Accounting Port (1-

65535)

Set the RADIUS account server(s) UDP port which is used to transmit RADIUS accounting

statistics between the Switch and the RADIUS server. The default port is 1813.

Timeout (1-255)

Set the RADIUS server age-out, in seconds.

Retransmit (1-20)

Set the RADIUS server retransmit time, in seconds.

Key (Max. length 32

bytes)

Set the key the same as that of the RADIUS server.

Confirm Key

Re-type the key which is the same as the above.

Click Apply to implement the changes.

RADIUS Accounting Settings

This window is used to configure the state of the specified RADIUS accounting service.

To view the following window, click Security > RADIUS > RADIUS Accounting Settings:

1 2 ... 137 138 139 140 141 142 143 144 145 146 147 ... 320 321

Keine Kommentare

D-Link DSA-3200 Technical Information Seite 142