D-Link DSA-3200 Technical Information PDF herunterladen (Seite 222)

xStack

DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide

208

To establish the rule for a previously created Access Profile:

To configure the Access Rules for Ethernet, open the Access Profile List window and click Add/View Rules for an Ethernet

entry. This will open the following window:

Figure 7 - 11. Access Rule List window for Ethernet

To remove a previously created rule, click the corresponding Delete Rules button. To add a new Access Rule, click the Add Rule

button:

Figure 7 - 12. Add Access Rule window for Ethernet

The following parameters can be cconfigured:

Parameter Description

Access ID (1-200) Type in a unique identifier number for this access. This value can be set from 1 to 200.

Auto Assign – Ticking this check box will instruct the Switch to automatically assign an Access ID

for the rule being created.

Action Select Permit to specify that the packets that match the access rule are forwarded by the Switch,

according to any additional rule added (see below).

Select Deny to specify that packets that match the access rule are not forwarded by the Switch

and will be filtered.

Select Mirror to specify that packets that match the access rule are mirrored to a port defined in

the config mirror port command. Port Mirroring must be enabled and a target port must be set.

Priority (0-7)

Tick the corresponding check box if you want to re-write the 802.1p default priority of a packet to

1 2 ... 217 218 219 220 221 222 223 224 225 226 227 ... 320 321

Keine Kommentare

D-Link DSA-3200 Technical Information Seite 222