D-Link DSA-3200 Bedienungsanleitung PDF herunterladen (Seite 25)

CONFIGURATION VARIABLES

Configuration Variables control the way the DSA functions. The Variables are assigned to one of several

groups: SCAN, CALIBRATION, IDENTIFICATION, PRESSURE, and DEBUG. Each variable is assigned a

“data type” description.

SCAN VARIABLES

VARIABLE A V G

VALID VALUES 1 to 240

DEFAULT VALUE 16

DATA TYPE integer

DESCRIPTION This sets the number of raw samples to acquire before producing a filtered

output.

VARIABLE B I N

VALID VALUES 1 or 0

DEFAULT VALUE 1

DATA TYPE integer

DESCRIPTION Sets the format of the data packet output.

1 = Binary

0 = ASCII

VARIABLE CVTUNIT

VALID VALUES any real number

DEFAULT VALUE 1.0

DATA TYPE float

DESCRIPTION Unit conversion factor. This converts the calibrated units to the requested

scan units. This value can be set directly or by setting the UNITSCAN

variable to the desired unit.

CVTUNIT will be set whenever UNITSCAN is set. It may be set

independently without setting UNITSCAN. If a user wants to have CVTUNIT

set to a different variable from UNITSCAN, UNITSCAN must be set first.

VARIABLE E U

VALID VALUES 0 or 1

DEFAULT VALUE 1

DATA TYPE string

DESCRIPTION Sets the output format for temperature and pressure units.

0 = raw units

1 = Engineering units

NOTE The module will output 999999 when one or more of the following conditions

exist:

1. The EU conversion exceeds the setting of PMAXL or PMAXH

2. The calculated temperature of any sensor is 79 degrees C or

greater.

The module will output -999999 when one or more of the following

conditions exist:

1. The EU conversion exceeds the setting of PMINL or PMINH

2. The calculated temperature of any sensor is 79 degrees C or

greater.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 51 52

Kommentare zu diesen Handbüchern

Keine Kommentare

D-Link DSA-3200 Bedienungsanleitung Seite 25

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung D-Link DSA-3200